Replica watches
atr-aeromorning-banner-accueil-698x96
chaire-sirius-space-tals-24-space-business-law-conference-728
enac-aeromorning-en
LHR_21-03_Aerospace_600x100
collins-aerospace
atr-aeromorning-banner-accueil-698x96
Collins
previous arrow
next arrow

Airbus-built European Robotic Arm ready for Space

News actualites aeromorning

Airbus-built European Robotic Arm ready for Space

Leiden, 05 July 2021 – Airbus space engineers have installed ESA’s European Robotic Arm (ERA) onto the Russian Multipurpose Laboratory Module (MLM) and it is now ready for its flight to the International Space Station (ISS). Together with this module, known as ‘Nauka’, ERA and its two control stations will launch from the Baikonur Cosmodrome, in Kazakhstan, on a Proton rocket.

After a one-week journey the European Robotic Arm will arrive at the ISS, where it will service the Russian segment of the space station.

With a total length of 11.3 metres, the symmetrical, two-handed intelligent robot arm can ‘walk’ around the exterior of the ISS, hand-over-hand from one fixed base-point to another. ERA’s seven robust and accurate joints, the lightweight limbs and the control computer in the middle of the arm give the robot arm its versatility.

Astronauts and cosmonauts can control the European Robotic Arm in real-time or pre-programme it from inside or outside of the ISS, to make it move payloads, inspect the space station with its infrared cameras and to support operations outside the ISS. From its tip, the robot provides electrical power, a data bus, a video line and a rotating drive machine.


By connecting a tool to the tip, ERA can be equipped for one of the many tasks it can perform automatically or semi-automatically. ERA has a lightweight construction but thanks to the zero-gravity conditions in space, it can move very large masses: from 3,000 kg routinely up to 8,000 kg in slow modus.

The robot arm operates with an accuracy of 5 millimetres.

ERA has been developed for European Space Agency (ESA) by a European consortium, led by Airbus Defence and Space in the Netherlands.

Airbus designed the arm and its software functions, managed the development of subsystems throughout Europe and integrated and tested the system. In the last few months Airbus has integrated ERA on the MLM, together with ESA and Russian partners RSC/Energia.

“The long awaited launch of the European Robotic Arm to the International Space Station marks a huge contribution of the Netherlands to the continued operation of the ISS, which was enabled by the loyal support of the Netherlands Space Office and the Ministry of Economic Affairs and Climate Policy,” said Rob Postma, Chief Executive Officer of Airbus Defence and Space Netherlands.

“In addition, it celebrates the effort, commitment and determination of the many space professionals involved throughout the years.”

European Robotic Arm, cleanroom Airbus Defence and Space Netherlands –Copyright Airbus DS NL

About Airbus Netherlands

Airbus Defence and Space Netherlands B.V. is part of Airbus and supplier of high-tech products and services for the international aerospace industry. The portfolio of Airbus Defence and Space Netherlands B.V. includes solar arrays, launcher structures, instruments & services, thermal-mechanical products and communication & control systems.

The Leiden-based company employs more than 250 experienced professionals.

SOURCE : AIRBUS

Be the first to comment on "Airbus-built European Robotic Arm ready for Space"

Leave a comment

Your email address will not be published.


*